Peugeot Hybrid 3 Evolution Scooter Electric

Peugeot has always been sensitive to research and innovation has a scratch prototype of the scooter Hybrid3 Evolution.
Already focused on creating powered scooter in an alternative way, we see the French company currently engage in another challenge to propose a three-wheel scooter, will be convinced that these types of resources that will allow us to rapidly move around the city and not just .

For fans of the means of so-called “rational” must “make a little eye but the engineers and designers who consider themselves strong supporters of these new models.

The Peugeot Hybrid3 Evolution boasts a distributed traction on the three wheels, the rear wheel is driven by an internal combustion engine from 300cc 41CV, while the two front wheels receive an electric motor 4CV each, reaching a combined output of 49 hp.

The maximum torque of the internal combustion engine is 4.6 kgm, while that of the electric motor is still 6.1 / 10.2 kgm.

Another feature that distinguishes the Evolution Hybrid3 are three modes of operation, namely electrical, thermal and hybrid are activated as needed to drive.

In the first mode we have a range of 10 km and is involved in starting or at low speed in the case of constant speeds are exploited only the 300cc engine, but when you run a strong acceleration or if the road allows you a four-wheel drive that distinguishes the hybrid mode.

Peugeot, for this prototype is also thought to reduce operating costs by including the Stop & Start device that turns off the engine when the vehicle is parked, a feature that in the past has been adopted by several automakers.

The front end is deformable parallelogram, the front wheels bend like the Piaggio MP3.

Consumption can be summarized as 50 km / l and 48 g / km of CO2. The tank will be very large, 15-liter with a range of 750 km

The tonnage Hybrid3 Evolution is quite considerable, 2,223 mm long, 820 mm wide and weighs 270 kg